Micromachining of circular ring microstructure by femtosecond laser pulses

In this paper, integration of interference phenomenon into femtosecond laser micromachining was reported as the femtosecond laser pulses were reshaped spatially to perform ablation. The generation of circular interference pattern was demonstrated by overlapping infrared femtosecond laser pulses. The interference pattern was subsequently focused on a copper substrate to ablate microstructures of concentric circular rings. The present technique is expected to open up new applications in the areas of rapid fabrication of micro-Fresnel lenses, hybrid microlenses and lens arrays.     

Silicon-Based Integrated Optic Pressure Sensor Using Intermodal Interference between TM-Like and TE-Like Modes

In this paper, a silicon-based integrated optic pressure sensor using an intermodal interference between the fundamental TM-like and TE-like modes is described. The sensor consists of a micromachined rectangular diaphragm and a straight polystyrene optical waveguide passing over the diaphragm. Its sensitivity is theoretically known to be strongly dependent on the position of the waveguide over the diaphragm. To experimentally investigate such dependence, we fabricated a sensor with a 1.2 mm ×10 mm ×20 μm diaphragm, over which waveguides were placed at 50 μm intervals. The measured phase sensitivity was 98 mrad/kPa for the waveguide nearest to the diaphragm edge. The measurement was also carried out for the other waveguides. As theoretically expected, the largest sensitivity was obtained for the waveguide nearest to the edge.     

All-optical frequency multiplication/recovery based on a semiconductor optical amplifier ring cavity

A novel scheme for all-optical frequency multiplication/recovery based on a semiconductor optical amplifier ring cavity is proposed and investigated numerically. The results show, for a 2.5 GHz driving pulse train, it can be generated 5-25 GHz repetition rate pulse trains with low clock amplitude jitter, polarization independence and high peak power. Furthermore, the extraction of the clock signal from a pseudorandom bit sequence signal can be realized based on the proposed scheme.     

Interference of probabilities and number field structure of quantum models

We study the probabilistic consequences of the choice of the basic number field in the quantum formalism. We demonstrate that by choosing a number field for a linear space representation of quantum model it is possible to describe various interference phenomena. We analyse interference of probabilistic alternatives induced by real, complex, hyperbolic (Clifford) and p‐adic representations.     

用于波分复用系统的多峰干涉滤光片

介绍了用于波分复用系统的多峰干涉滤光片的设计原理,提出了滤光片透射峰位置的确定方法,讨论了影响滤光片半宽度和截止度的因素,给出了滤光片的膜厚容差分析结果,表明透射率监控标准偏差在<0.5%范围内,可以得到波形良好的多峰滤光片,最后给出了实验结果.     

激光等离子体探针及应用研究

本文介绍用阴影、纹影相干涉方法确定等离子体折射系数变化的原理。分析了等离子体中的非线性效应和对光探测系统的基本要求。并简要叙述了实验上采用的后向喇曼探测束,给出了等离子体干涉、纹影和阴影的测量结果。     

压差式矢量水听器方位估计中的干扰抵消

矢量水听器由于能获取声场中标量（声压）和矢量（振速）信息，因此单个的矢量水听器就可实现目标方位估计。单个矢量水听器是利用信号的声压和质点振速之间相关性进行信号方位估计，但是当存在干扰，并且干扰和信号之间相关时，如果对运用能量流进行方位估计的方法不加改进，则会出现很大的误差，甚至出现错误的估计。本文提出一种存在已知噪声干扰情况下的干扰抵消方法，并针对该方法进行了仿真试验，最后运用湖试数据进行了验证。结果表明，该方法能有效地减弱相千千柑对信号的影响，实现对信号的方位估计。     

Nanophotonics and nanometrology with planar X-ray waveguide-resonator

The mechanism of X-ray waveguide-resonance propagation or the radiation superstream model, which can become the ground of X-ray nanophotonics, is discussed briefly. Some attention is devoted to features consideration of the simplest devices characterized by the waveguide-resonance transportation of X-ray beams. The experimental data showing the user possibilities of a simplest waveguide-resonators application for diffractometry are presented. We discuss the main reasons to improve the metrological characteristics for total reflection X-ray fluorescence (TXRF) analytical method in case when the target exciting beam is formed by a waveguide-resonator. Some problems appearing during the waveguide-resonator application are formulated.     

Interference of circularly polarized light: contrast and application in fabrication of three-dimensional periodic microstructures

The contrast of interference pattern formed by two circularly polarized waves and by a linearly polarized wave and a circularly polarized one is discussed. The results are compared with that by two linear beams. It shows that the use of circular light in holographic fabrication of three-dimensional periodic microstructures may remove the necessity of beam ratio and polarization optimization needed in the interference of three linear noncoplanar beams and improve the uniform contrast of resultant pattern simultaneously.     

阵列波导光栅波分复用/解复用器光谱响应效率的理论模型

基于单模光波导的本征模场分布，瑞利－索末菲衍射积分公式和天线原理的互易定理，给出耦合器中两个非接触平面光波导耦合特性的描述.基此，根据等光程差不等振幅多光束干涉的光场叠加原理，推导出新颖的阵列波导光栅波分复用/解复用器的光谱响应效率的解析函数表达式，这些表达式可为快速精确分析阵列波导光栅波分复用/解复用器的特性提供理论基础.同时,介绍了一个计算阵列波导光栅波分复用/解复用器特性的例子，给出其光谱响应度和信号通道串扰.